 |
| Sensor Kit, NVH Base (w/o speed sensor) |
Includes the following items:
(1) Microphone
(1) Microphone Wind Screen
(1) 10 ft BNC Cable
(4) Accelerometers
(4) Accelerometer Magnets
(4) Inline Charge Amplifiers
(4) Low Noise Cables
(4) 15 ft BNC Cables
(2) Pressure Sensors (0 – 2500 PSIG)
(2) Pressure Sensor Cables
(8) Thermocouples
(8) K-Type Mini Plugs
(100 ft) K-Type TC Wire
(100 ft) Sensor Wire
(1) Humidity Temperature Sensor (pre-wired)
NOTE: Some items are not shown in the picture.
|
| |
| Base SKU:20K-2001 |
| In Stock:Yes |
| Price: $8,500.00 |
| |
|
|
|
|
 |
| Sensor Kit, NVH ES (with encoder speed sensor) |
Includes the following items:
(1) Microphone
(1) Microphone Wind Screen
(1) 10 ft BNC Cable
(4) Accelerometers
(4) Accelerometers Magnets
(4) Inline Charge Amplifiers
(4) Low Noise Cables
(4) 15 ft BNC Cables
(2) Pressure Sensors (0 – 2500 PSIG)
(2) Pressure Sensor Cables
(8) Thermocouples
(8) K-Type Mini Plugs
(100 ft) K-Type TC Wire
(100 ft) Sensor Wire
(1) Humidity Temperature Sensor (pre-wired)
(1) Speed Sensor (Encoder Sensor with Installation Hardware Kit)
NOTE: Some items are not shown in the picture.
|
| |
| Base SKU:20K-2002 |
| In Stock:Yes |
| Price: $14,500.00 |
| |
|
|
|
|
 |
| Sensor, Accelerometer - BrakeDAQ Standard |
Sensor, Accelerometer - BrakeDAQ Standard
|
Performance:
|
English |
| Sensitivity (+/- 10%) |
3.0 pc/g |
| Range |
+/- 2300 g pk |
| Frequency Range (+ 5%) |
12 kHz |
| Frequency Range (+ 10%) |
16 kHz |
| Frequency Range (+ 3 db) |
26 kHz |
| Resonant Frequency |
> or = 50 kHz |
| Non- Linearity |
+/- 1% |
| Transverse Sensitivity |
< 5% |
| Environmental |
|
| Overlaod Limit (shock) |
+/- 10000 g pk |
| Temperature Range |
-95 to 500 F |
| Base Strain Sensitivity |
0.002 g/ue |
|
| |
| Base SKU:20-2001 |
| In Stock:Yes |
| Price: $450.00 |
| |
|
|
|
|
|
|
|
|
|
|
 |
| Sensor, Humidity/Temperature |
Accurate Humidity / Temperature measurement over a wide working range in a small housing. Comes with a pre wired cable and connector (6 pin)
|
| |
| Base SKU:20-4001 |
| In Stock:Yes |
| Price: $350.00 |
| |
|
|
|
|
 |
| Sensor, Inline Charge Amplifier - BrakeDAQ Standard |
Models 422E35 and 422E36 serve to convert charge mode piezoelectric sensor signals into low-impedance voltage signals for input to readout,recording, and analysis instruments. These units are especially well suited for use with high-temperature, piezoelectric acceleration, pressure, and force sensors, since they will accept source resistances as low as 10k ohm.
|
| |
| Base SKU:20-2003 |
| In Stock:Yes |
| Price: $450.00 |
| |
|
|
|
|
 |
| Sensor, Microphone-ICP |
|
PERFORMANCE
|
ENGLISH |
SI |
| Nominal Microphone Diameter |
1/4" |
|
| Frequency Response Characteristic(at 0° incidence) |
Free-Field |
|
| Frequency Response(± 1 dB) |
100 to 4000 Hz |
|
| Frequency Response(-2 to 5 dB) |
20 to 15,000 Hz |
|
| Phase Match(100 Hz to 5 kHz) |
± 5 ° |
|
| Sensitivity(@ 1 kHz) |
45 mV/Pa |
|
| Sensitivity(± 3 dB)(@ 1 kHz) |
-26.9 dB re 1 V/Pa |
|
| Inherent Noise(1/3 Octave @ 1 kHz) |
<15 dB |
|
| Inherent Noise(Linear Spec. 100 Hz to 10 kHz) |
<30 dB |
|
| Dynamic Range(3% Distortion Limit) |
>122 dB |
|
| ENVIRONMENTAL |
|
|
| Temperature Range(Operating) |
+14 to +122 °F |
|
| Temperature Effect on Output(-10 to +50 °C) |
<0.7 dB |
|
| ELECTRICAL |
|
|
| Excitation Voltage |
18 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
|
| Output Bias Voltage |
5 to 12 VDC |
|
| Output Impedance |
70 ohm |
|
| PHYSICAL |
|
|
| Housing Material |
Stainless Steel |
|
| Sealing |
Epoxy |
|
| Electrical Connector(Output) |
BNC Jack |
|
| Size (Diameter x Length)(overall) |
0.5 in x 2.67 in |
|
| Size (Diameter x Length)(head) |
0.275 in x 0.25 in |
|
| Weight |
0.66 oz |
|
|
| |
| Base SKU:20-1001 |
| In Stock:Yes |
| Price: $580.00 |
| |
|
|
|
|
 |
| Sensor, Pedal Effort 0 - 400 lbs |
Specifications
Overload capacity.................................................... 150% of F.S.
Output at full scale load ...................................2.0 mV/V nominal
Non-linearity ........................................................... 0.10% of F.S.
Hysteresis............................................................... 0.10% of F.S.
Zero balance................................................................ 1% of F.S.
Compensated temperature........................................70 to 170°F
Useable temperature ............................................. -65 to +250°F
Temperature effect on zero.............................. 0.002% of F.S./°F
Temperature effect on span............................0.002% of Rdg./°F
Bridge resistance.........................................................700 Ohms
Excitation voltage, maximum............................................ 20 Vdc
|
| |
| Base SKU:20-4001 |
| In Stock:Yes |
| Price: $2,875.00 |
| |
|
|
|
|
 |
| Sensor, Pressure, 10mv/V Output, 10 Volts Supply, Range 0 - 2500 psig |
| This sensor offers a high burst pressure, and a high accuracy of ±.25% Full Scale (B.F.S.L.) are featured. The sensor consists of silicon piezoresistive strain gages mounted on a flat metal diaphragm, arranged in a wheatstone bridge configuration. The output is conditioned for 100 mV full scale output for all ranges (10mV/Volt). The sensor, with hybrid compensation network is packaged in an all stainless steel housing for use in harsh environments. |
| |
| Base SKU:20-3001-2500 |
| In Stock:Yes |
| Price: $350.00 |
| |
|
|
|
|
 |
| Sensor, Speed Encoder Based System |
Encoder Speed Sensor
Speed/ Distance Accuracy ñ 0.16 kmh, ñ 0.1 mph
Distance Resolution 100 or 500 or 1000 pulses/revolution depending on model
Includes: Hardware to mount to a chuck plate, Suction Cup Assembly, and a
wheel chuck set (19mm or 21 mm)"
Output Voltage (TTL) 5V pulses Standard length of wheel
chuck?60 mm
Pulse Output 2 channels w/n pulses/rev phase shifted by 90ø
Pulse Ratio 50 % duty cycle ñ 5 %
Operating Temp. -25 to 65 (øC), -13 to 149 (øF)
Current Consumption Max. 60 mA
Supply Voltage 5 to 15 V DC
|
| |
| Base SKU:20-8001 |
| In Stock:Yes |
| Price: $7,600.00 |
| |
|
|
|
|
